FABOOL Laser CO2(2019~) Manual
| No. | Parts Name | Notes | Pictures | Qty |
| 62 | AC-Laser Cable |  |
1 | |
| 64 | AC-DC Cable |  |
1 | |
| 66 | Power Cable |  |
1 | |
| 82 | Ground(S) Cable |  |
1 | |
| 38 | Cable Ties |  |
4 | |
| 91 | M5 Post-Assembly Nut |  |
1 | |
| 117 | M5 Washers |  |
1 | |
| 111 | Toothed Washer |  |
1 | |
| 31 | M5x8 Hex Socket Head Cap Screw |  |
1 |
Referring to the photo, fix the [63] AC-Main Cable with [38] Cable Ties to the attached [39] Cable Catches.
Connect the [62] AC-Laser Cable to the [18] Power For Laser.
Attach each cable to the [43] Terminal Block as shown in the picture. Be sure put the correct color wires when connecting.
* If the wiring is wrong, there is a possibility that the main body may be damaged when powered on.
Attach the [82] Ground(S) Cable to the main body in the order shown in the picture.
• [31] M5x8 Hex Socket Head Cap Screw
• [82] Ground(S) Cable
• [117] M5 Washer
• [111] Toothed Washer
• [91] M5 Post-Assembly Nut
* Please install tight enough that the aluminum frame gets scratched.
Attach it in the position shown in the photo.
Thread the [64] AC-DC Cable through the [18] Power For Laser and [126] Inner acrylic as indicated by the blue arrow. Fix it with a [38] Cable Tie and the [39] Cable Catch that was put in previously, marked by the red arrow in the photo.
Attach each cable to the [36] Switching Power Supply as shown in the picture. Make sure to note the color of the wires and connect them in the correct spot.
* If the wiring is wrong, there is a possibility that the main body may be damaged when powered on.
