FABOOL Laser CO2(2019~) Manual
| No. | Parts Name | Notes | Pictures | Qty |
| 51 | Lens Mount Guide |  |
1 | |
| 57 | Lens Mount |  |
1 | |
| 58 | Lens Nut |  |
1 | |
| 59 | Air Assist Holder |  |
1 | |
| 94 | Thumb Screw |  |
1 | |
| 92 | Fitting |  |
1 | |
| 97 | M3x6 Hex Socket Head Cap Screw |  |
1 | |
| 136 | M3×4 Hex Socket Head Cap Screw |  |
2 | |
| 132 | Position Bracket |  |
1 | |
| 96 | M3x3 Hex Socket Head Cap Screw |  |
2 |
Attach the [58] Lens Nut to the [57] Lens Mount.
Attach the [51] Lens Mount Guide to the [57] Lens Mount using a [97] M3x6 Hex Socket Head Cap Screw. Make sure to atach the [51] Lens Mount Guide in the correct direction.
Attach the [132] Position Bracket to the [51] Lens Mount Guide with 2 [96] M3x3 Hex Socket Head Cap Screws. Make sure to attach the [132] Position Bracket in the right direction.
Attach the [59] Air Assist Holder to the [57] Lens Mount with 2 [136] M3×4 Hex Socket Head Cap Screws. Make sure to attach the [59] Air Assist Holder in the corect direction.
Attach the [92] Fitting to the [59] Air Assist Holder.
Attach the [optional] Pointer Holder with the supplied screw.
* This assembly is only necessary for those who purchased the optional Positioning Kit.
Attach the [optional] Laser Pointer with the 2 supplied set screws.
Attach the assembled laser head to the [34] Wheel Plate x-axis with the [94] Thumb Screw.
Insert the [27] Polyurethane Tube into the [92] Fitting.
Connect the pointer cable to the [optional] Laser Pointer.
