FABOOL Laser CO2(2019~) Manual
For laser tube with laser pointer click here.
| No. | Parts Name | Notes | Pictures | Qty |
| 26 | Water Cooling Hose |  |
1 | |
| 61 | Flow Sensor |  |
1 | |
| 38 | Cable Ties |  |
8 |
Attach the [26] Water Cooling Hose to the back port of the [25] Water Cooling Pump (as shown in the photo).
Attach the hose from the outtake port of the [25] Water Cooling Pump to the side of the [17] Laser Tube that does not irradiate the laser (the side with the [21] LED DC Fan). Cut to the appropriate length and attach.
Attach the other hose to the intake port of the [25] Water Cooling Pump (bottom-most port in the photo).
Attach the hose from the intake port of the [25] Water Cooling Pump to the [20] Radiator Unit (center of the photo). Cut to the appropriate length and attach.
Attach the hose to the side of the [17] Laser Tube that irradiates the laser (by Mirror #1).
* Please be careful, as the [17] Laser Tube may break if excessive force is applied.
Attach to the [61] Flow Sensor. Please cut to the appropriate length and attach.
* Attach so that the arrow faces downward.
Attach the hose to the lower side of the [61] Flow Sensor and to the [20] Radiator Unit port in the back. Cut to the appropriate length.
Fix the 8 attached places of the hose with [38] Cable Ties. Cut off the excess.
Fix the [26] Water Cooling Hose attached to the [20] Radiator Unit from the [25] Water Cooling Pump together with the [63] AC-Main Cable using 3 [38] Cable Ties.
