FABOOL Laser DS (2018/08~) Manual
| No. | Parts Name | Notes | Pictures | Qty |
| 198 | RELAY DC POWER Cable |  |
1 | |
| 199 | RELAY MOTOR Cable |  |
1 | |
| 200 | RELAY SIGNAL Cable |  |
1 | |
| 174 | Power Cable |  |
1 | |
| 184 | sub board Cable |  |
1 | |
| 176 | FAN1 Cable |  |
1 | |
| 177 | FAN2 Cable |  |
1 | |
| 111 | 80mmDC Fan |  |
1 | |
| 138 | M4x30 Low Head Screw |  |
4 | |
| 132 | M4 Nut |  |
4 | |
| 120 | Cable Ties |  |
3 |
Connect [176]FAN1 Cable to [85]LED DC fan.
Connect Lase Cable to [84]Power For 80W Laser.
Put throught the following cables under [78]Utility BKT2 that has [84]Power For 80W Laser installed, and fix them on [119]Cable Catch using [120]Cable Ties.
Put through the cables under [78]Utility BKT2 that has Water Cooling Device installed, and fix them on [119]Cable Catch using [120]Cable Ties.
Attach [111]80mm DC fan on [60]Inner L with 4 of [138]Low Head Screw and 4 of [132]M4 Nut.
Make sure that [111]80mm DC fan is facing the right direction.
Place [111]80mm DC fan to make the side with sticker marked model number face the processing area.
Connect [177]FAN2 Cable to [111]80mm DC fan.
Picture of completed components
Power Cable
RELAY DC Power Cable
X-Motor Cable
Y-Motor-R Cable
Y-Motor-L Cable
RELAY MOTOR Cable
Y1-Limit Cable
Y2-Limit Cable
Laser Cable
FAN Cable
RELAY SIGNAL Cable
Put RELAY DC POWERCable, RELAY MOTOR Cable and RELAY SIGNAL Cable out of the main body part.
Picture of completed components
Water Cooling Pump
Radiator Unit DC fan
FAN1 Cable
LED Cable
sub Board Cable
