FABOOL Laser Mini (2017/08~) Manual
| Part Name | Part ID | Qty |
|---|---|---|
| Laser unit | D-4 | 1 |
| Optical Carrier | D-3 | 1 |
| Height adjustment acrylic | A-5 | 1 |
| M6×8 hex socket head cap bolt | C-1 screw case | 1 |
| Cable tie | C-1 | 1 |
*For part ID, see FABOOL Laser Mini packing list
Complete the installation on a flat surface.
Temporarily fix the optical carrier in the tapped hole in the center of the laser unit. Fix it with the M6×8 hex socket head cap bolt while pushing the optical carrier down (as shown in the picture).
Fix the optical stage (on top of the mini v plate_C) and optical carrier (on top of the laser unit).
Connect the laser cable and laser unit.
Tie the laser cables with a cable tie as in the picture.
Installation is complete.
