Flame Damper Kit for FABOOL Laser CO2/DS Manual
| Parts Name | Notes | Pictures | Qty |
| Compressor |  |
1 | |
| Conversion tube |  |
1 | |
| Converting fiting |  |
1 | |
| Polyurethane Tube |  |
1 |
Connect Conversion tube to the tip of the Air Compressor.
Thrust the tube in as far as it will go.
Connect Converting fiting to the other tip of Conversion tube. Thrust the tube in as far as it will go.
Connect Polyurethane tube to the other tip of Converting fiting. Thrust the tube in as far as it will go.
Referring to the picture, connect Polyurethane tube to the Panel Touch Connector on the main body.
Thrust the tube in as far as it will go.
Check whether air is properly supplied through the tube to the processing area.
