Exhaust Fan Kit for FABOOL Laser DS Manual
| Parts Name | Notes | Pictures | Qty |
| Exhaust Fan/td> |  |
1 | |
| Deformed joining component |  |
2 | |
| Air duct |  |
2 | |
| Aluminum tape |  |
1 | |
| Air duct fixing tool |  |
3 |
Cut the Aluminum tape into half.
Attach the deformed joining component into the exhaust fan with one piece of aluminum tape.
Repeat the 2. procedure for the other end.
Install one air duct into the hole on the Back R.
Place the air duct fixing tool before the air duct and clip the duct to the washer socket.
Tighten the clip to lock the air duct in a position. DO NOT tighten it too firm to avoid breaking the washer socket.
Attach the other end of the air dut into one end of the exhaust fan. Use a fixing tool to tighten.
Attach another air dut into the other end of the exhaust fan. Use a fixing tool to tighten.
