FABOOL Laser CO2(2019~) Manual
| No. | Parts Name | Notes | Pictures | Qty |
| 42 | Reflecting Mirror |  |
2 | |
| 42 | Reflecting Mirror |  |
1 |
Attach the second [42] Reflecting Mirror to the [32] Mirror Mount.
Radiate toward the #3 [42] Reflecting Mirror. Similar to the #2 mirror, start from the closest point.
Next, radiate in the center of the X-axis.
Adjust the #2 [32] Mirror Mount according to the deviation.
If it deviates greatly in the vertical direction, adjust by twisting the aluminum frame fixing the #2 [32] Mirror Mount itself. Adjust with the adjustment screws on the [32] Mirror Mount for fine adjustments. Make slight adjustments to correct deviations of both short and long distances when irradiating the laser.
As shown in the photo above, if it deviates greatly in the horizontal direction, adjust the #2 [32] Mirror Mount little by little as shown in the picture.
Adjust with the adjustment screws on the [32] Mirror Mount for fine adjustments. After adjusting, confirm that the laser is in the center of the #3 [42] Reflecting Mirror when irradiated.
Attach the #3 [42] Reflecting Mirror. Irradiate at the laser head part. If it deviates greatly, adjust the inclination of the [32] Mirror Mount of the #3 Reflecting Mirror.
Adjust with the adjustment screws on the [32] Mirror Mount for fine adjustments. Adjust so that the when irradiate at the laser head part it is in the center of the mirror.
Irradiate the laser at the four corners of the processing area and check whether the laser is still hitting in center.
Irradiation at right front.
Irradiation at left front.
Irradiation at right back.
Irradiation at left back.
Attach the [47] Focus Lens. Please note the correct orientation of the [47] Focus Lens. The side that sticks out faces upwards.
