FABOOL Laser CO2(2019~) Manual
| No. | Parts Name | Notes | Pictures | Qty |
| 130 | Height Adjustment Jig 1,2 |  |
1 each |
Pull the [35] Wheel Plate x-axis to the left. At a position slightly away from the limit, measure from the center of the mirror and adjust the position of the [53] Limit Mount so that you can move 600mm when moving to the right as well.
Pull the [34] Wheel Plate y-axis to the left. At a position slightly away from the limit, measure from the center of the mirror and adjust the position of the [53] Limit Mount so that you can move 440mm when moving to the right as well.
Place the material for processing on the processing bed.
Loosen the [94] Thumb Screw to adjust the height. Combine the [130] Height Adjustment Jig 1 and Height Adjustment Jig 2 and position the [57] Lens Mount squarely on top. Here the focus is on the surface of the object to be processed. After adjusting, tighten the [94] Thumb Screw securely.
Remove the [130] Height Adjustment Jigs. The height adjustment is now complete.
