1. Before Starting
2. Packing List
3. Handling of Main Body Frame Members
4. XY axis unit Assembly
5. Inner acrylic equipment installation
6. Main body frame the lower part assembly
7. Main body frame the middle part assembly
8. Main body frame the upper part assembly
9. Laser tube mount assembly
10. Laser head assembly
11. Mirror Mount assembly
12. Water Cooling Device Assembly
13. Relay PCB/ Power For Laser assembly
14. Caster Assembly
15. Bottom Installation (With the designated workbench)
16. Bottom Installation (Without the designated workbench)
17. Inner Cover Installation
18. XY axis Unit Adjustment
19. XY axis Accessories Installation
20. Timing Belt Installation
21. Cable Carrier Installation and Wiring
22. Cover Installation
23. Water Cooling Device, Relay PCB, 80W Laser Installation
24. DC Line Wiring
25. AC Line Wiring ~ Wire Arrangement
26. Laser Head Installation
27. Laser Tube Installation
28. Processing Bed Assembly and Installation
29. Top Cover Assembly and Installation
30. Mirror Mount Installation
31. Tester Conduction Confirmation
32. Back Cover Installation
33. Optical Axis Adjustment Laser Tube
34. Optical Axis Adjustment 1st Mirror
35. Optical Axis Adjustment 2nd / 3rd Mirror
36. Top Back Installation and Competion of Main Body
37. Head Height Adjustment and Preparation for Processing
38. Maintenance
39. Maintenance Parts

FABOOL Laser DS (2018/08~) Manual

Top Back Installation and Competion of Main Body

No.	Parts Name	Notes	Pictures	Qty
51	Top back-LR			2
145	M5×8 Low Head Screw			8
139	M5 Post-in Nut			8

Assembly Procedure

Top back-LR Installation

Attach 2 of [51]Top back-LR with 8 of [145]M5×8 Low Head Screw and 8 of [139]M5 Post-in Nut.