FABOOL Laser Mini Manual
|Part Name||Part ID||Qty|
|Height adjustment acrylic||A-5||1|
|M6×8 hex socket head cap bolt||C-1 screw case #③||1|
*For part ID, see FABOOL Laser Mini packing list
Complete the installation on a flat surface.
Temporarily fix the optical carrier in the tapped hole in the center of the laser unit. Fix it with the M6×8 hex socket head cap bolt while pushing the optical carrier down (as shown in the picture).
Fix the optical stage (on top of the mini v plate_C) and optical carrier (on top of the laser unit).
Connect the laser cable and laser unit.
Tie the laser cables with a cable tie as in the picture.
Installation is complete.
To Height Adjustment of Laser Unit, Preparation for Cutting/Engraving ≫