FABOOL Laser Mini Manual

06. Wiring-1 ( For later shipment than July 28th 2017 )

List of Parts

list of parts
Part Name Part ID Qty
PCB cable B-1 1
Laser cable B-1 1
Y-Axis-R cable B-1 1
X-Axis cable B-1 1
Y-Axis-L cable B-1 1
Foot Switch cable B-1 1
Cable tie C-1 2

*For part ID, please see FABOOL Laser Mini packing list

 

 

*This process differs for 1.6W model and 3.5W model. Please see the appropriate section.

 

 

Wiring of Laser Board (for 1.6W)

*For instruction for 3.5W, please click here.

 

Wiring

We will do the wiring of six cables as shown in the picture.

PCB cable

PCB case wiring
PCB case wiring close up
PCB case wiring close up

Laser cable *Wiring for the opposite side will be done later

laser cable wiring

X-Axis cable *Wiring for the opposite side will be done later

x-axis wiring

Y-Axis-R cable *Wiring for the opposite side will be done later

y-axis-r wiring

Y-Axis-L cable *Wiring for the opposite side will be done later

y-axis-l wiring

Foot Switch cable *Wiring for the opposite side will be done later

foot switch cable wiring

Gathering Cables within PCB Case

We will gather cables with two cable ties. For the fixing method, please refer to the video below.

Wiring should look like this.

wirings should look like this

View from back.

view from the back

Cut off unnecessary part of the cable ties.

cutting cable ties

Go to Wiring-2 ≫

Wiring of Laser Board (for 3.5W)

Wiring

We will do the wiring of six cables as shown in the picture.

<PCB cable>

wiring of PCB case
PCB case wiring close-up
PCB case wiring close-up

<Laser cable> *Wiring for the opposite side will be done later

laser cable wiring

<X-Axis cable> *Wiring for the opposite side will be done later

x-axis cable wiring

<Y-Axis-R cable> *Wiring for the opposite side will be done later

<Y-Axis-L cable> *Wiring for the opposite side will be done later

y-axis-l cable wiring

<Foot Switch cable> *Wiring for the opposite side will be done later

foot switch cable wiring

Gathering Cables within PCB Case

We will gather cables with two cable ties. For the fixing method, please refer to the video below.

Wiring should look like this.

finished wiring

View from back.

view from behind

Cut off unnecessary part of the cables.

cut off cable ties

Go to Wiring-2 ≫