FABOOL Laser Mini (2017/08~) Manual
| Part Name | Part ID | Qty |
|---|---|---|
| PCB cable | B-1 | 1 |
| Laser cable | B-1 | 1 |
| Y-Axis-R cable | B-1 | 1 |
| X-Axis cable | B-1 | 1 |
| Y-Axis-L cable | B-1 | 1 |
| Foot Switch cable | B-1 | 1 |
| Cable tie | C-1 | 2 |
*For parts ID, see FABOOL Laser Mini packing list
*This process differs for 1.6W model and 3.5W model. See the appropriate section.
*For instruction for 3.5W, click here.
Six cables will be wired as shown in the picture.
PCB cable
Laser cable *Wiring for the opposite side will be done later
X-Axis cable *Wiring for the opposite side will be done later
Y-Axis-R cable *Wiring for the opposite side will be done later
Y-Axis-L cable *Wiring for the opposite side will be done later
Foot Switch cable *Wiring for the opposite side will be done later
Gather cables with two cable ties. For the fixing method, refer to the video below.
Wiring should look like this.
View from back.
Cut off unnecessary part of the cable ties.
Six cables will be wired as shown in the picture.
＜PCB cable＞
＜Laser cable＞ *Wiring for the opposite side will be done later
＜X-Axis cable＞ *Wiring for the opposite side will be done later
＜Y-Axis-R cable＞ *Wiring for the opposite side will be done later
＜Y-Axis-L cable＞ *Wiring for the opposite side will be done later
＜Foot Switch cable＞ *Wiring for the opposite side will be done later
Gather cables with two cable ties. For the fixing method, refer to the video below.
Wiring should look like this.
View from back.
Cut off unnecessary part of the cables.
