FABOOL Laser Mini Manual

06. Wiring-1

List of Parts

list of parts
Part Name Part ID Qty
PCB cable B-1 1
Laser cable B-1 1
Y-Axis-R cable B-1 1
X-Axis cable B-1 1
Y-Axis-L cable B-1 1
Foot Switch cable B-1 1
Cable tie C-1 2

*For part ID, please see FABOOL Laser Mini packing list

 

 

*This process differs for 1.6W model and 3.5W models. See the appropriate section.

 

 

Wiring of Laser Board (for 1.6W)

*For instruction for 3.5W, click here.

 

Wiring

Six cables will be wired as shown in the picture.

PCB cable

PCB case wiring
PCB case wiring close up
PCB case wiring close up

Laser cable *Wiring for the opposite side will be done later

laser cable wiring

X-Axis cable *Wiring for the opposite side will be done later

x-axis wiring

Y-Axis-R cable *Wiring for the opposite side will be done later

y-axis-r wiring

Y-Axis-L cable *Wiring for the opposite side will be done later

y-axis-l wiring

Foot Switch cable *Wiring for the opposite side will be done later

foot switch cable wiring

Gathering Cables within PCB Case

All the cables will be held with two cable ties. For the fixing method, refer to the video below.

Wiring should look like this.

wirings should look like this

View from back.

view from the back

Cut off excess material from the cable ties.

cutting cable ties

To Wiring-2 ≫

Wiring of Laser Board (for 3.5W)

Wiring

Six cables will be wired as shown in the picture.

<PCB cable>

wiring of PCB case
PCB case wiring close-up
PCB case wiring close-up

<Laser cable> *Wiring for the opposite side will be done later

laser cable wiring

<X-Axis cable> *Wiring for the opposite side will be done later

x-axis cable wiring

<Y-Axis-R cable> *Wiring for the opposite side will be done later

<Y-Axis-L cable> *Wiring for the opposite side will be done later

y-axis-l cable wiring

<Foot Switch cable> *Wiring for the opposite side will be done later

foot switch cable wiring

Gathering Cables within PCB Case

Cables will be held together with two cable ties. For the fixing method, refer to the video below.

Wiring should look like this.

finished wiring

View from back.

view from behind

Cut off unnecessary material from the cables.

cut off cable ties

To Wiring-2 ≫