FABOOL Laser CO2(2019~) Manual
| No. | Parts Name | Notes | Pictures | Qty |
| 32 | Mirror Mount |  |
3 | |
| 15 | Aluminum Frame For #1 Mirror |  |
1 | |
| 16 | Aluminum Frame For #2 Mirror |  |
1 | |
| 29 | Right-Angle Bracket |  |
2 | |
| 30 | M5 Pre-Assembly Nut |  |
4 | |
| 31 | M5x8 Hex Socket Head Cap Screw |  |
4 | |
| 106 | M5x16 Hex Socket Countersunk Head Cap Screw |  |
2 | |
| 108 | M5x25 Hex Socket Countersunk Head Cap Screw |  |
1 | |
| 115 | M5 Nylon Nut |  |
1 |
If the [32] Mirror Mount is tilted as is in the NG picture, turn the screws to adjust it.
Attach [15] Aluminum Frame For #1 Mirror with a [29] Right-Angle Bracket, 2 [30] M5 Pre-Assembly Nut (one of them is already set in advance) and 2 [31] M5x8 Hex Socket Head Cap Screws.
Make sure that the surface of the [15] Aluminum Frame For #1 Mirror and that of main body frame is parallel and to make the disitance between [2] V-slot 780mm and [15] Aluminum Frame For #1 Mirror be 40mm.
Attach [32] Mirror Mount on the attached [15] Aluminum Frame For #1 Mirror with [30] M5 Pre-Assembly Nut and [106] M5x16 Hex Socket Countersunk Head Cap Screw.
Fix them in accordance with the surface cut 45 degrees.
Attach [16] Aluminum Frame For #2 Mirror with a [29] Right-Angle Bracket, 2 [30] M5 Pre-Assembly Nut (one of them is already set in advance) and 2 [31] M5x8 Hex Socket Head Cap Screws.
Make sure that the surface of the [16] Aluminum Frame For #2 Mirror and that of main body frame is parallel and to make the disitance between [1] V-slot 848mm and [16] Aluminum Frame For #2 Mirror be 60mm.
Attach [32] Mirror Mount on the attached [16] Aluminum Frame For #2 Mirror with [30] M5 Pre-Assembly Nut and [106] M5x16 Hex Socket Countersunk Head Cap Screw.
Fix them in accordance with the surface cut 45 degrees.
Attach the rest of the [32] Mirror Mounts on the [34] Wheel Plate x-axis with [108] M5x25 Hex Socket Countersunk Head Cap Screw and [115] M5 Nylon Nut.
Make sure that the diagnal cut section fits the [32] Mirror Mount.
