Smart Laser CO2 Manual
Move the aluminum frame for the second mirror all the way down to the side as shown in the picture and fix it.
Place the X1-Limit so that it touches the aluminum frame for the second mirror and fix it.
The X1-Limit should be parallel and vertical to the X axis V-slot when fixed.
Move the X axis unit by hand and check if it touches the limit.
X-axis Limit End
Move the X axis unit to the limit and fix it at a position where they touch.
Move the axis along the Y side and fix it at a position where it touches the limit.
Y-axis limit end
Fix it at the position where the limit touches.
If parts other than limit (such as cable carrier) touch the axis first, adjust the position of limit.