1. Smart Laser CO2
2. Assembly of Body Frame (bottom part)
3. Installing Pre-assembled Inner Acrylic
4. Assembly of Body Frame (Middle upper part)
5. X-axis unit assembly
6. Y-axis unit assembly
7. Assembly and Adjustment of Y-axis Unit
8. Assembly of Parts around the Axis
9. Assembly and Adjustment of X-axis Unit
10. Final Assembly of Body Frame
11. Attachment of Cover Bottom
12. Attachment of Inner Cover
13. Attachment of Timing Belt
14. Attachment of Laser Power Supply
15. Attachment of Accessories
16. Attachment of Cover Front
17. Wiring of DC Line
18. Attachment of Outside Cover
19. Wiring of AC Line
20. Attachment of Working Bed
21. Adjustment of Axis Limit
22. Attachment of Mirror Lens Mount
23. Attachment of Top Cover
24. Attachment of Laser Tube
25. Optical axis adjustment (Laser tube)
26. The #1 reflection mirror optical axis adjustment
27. The #2 and #3 reflection mirror optical axis adjustment
28. Cover attachment
29. Installation of software
30. How to use software
31. Height adjustment, How to use
32. How to make an SVG file
33. Option : Water cooling kit assembly
34. Option :Laser pointer kit attachment
35. Maintenance
36. FAQ

Smart Laser CO2 Manual

FAQ

Smart laser CO2 doesn’t recognize on the computer

After install a computer driver, please restart then check whether recognize it.

Although started in browser, software does not work.

Please check your browser type. This software can be worked only new version of the Chrome or Firefox.

Backend error

It probably set up is out of range processing. Please check the data file again.

Backend error when you import a DXF file

Once loading the data file in inkscape or Illustrators and please adjust the position then save it in the SVG file.

Error loading engrave data file

For engraving in the embedded image data file needs a blank space.
If the image placed on before range of the document, It will read error.

Can the Smart laser software fill the image or text that was created in illustrator?

No, Smart laser software cannot read illustrator’s fill function.
It requires raster engraving to fill the image or filling the text with a path.
Please refer to the website below.
How to evenly place the path