1. Smart Laser CO2
2. Assembly of Body Frame (bottom part)
3. Installing Pre-assembled Inner Acrylic
4. Assembly of Body Frame (Middle upper part)
5. X-axis unit assembly
6. Y-axis unit assembly
7. Assembly and Adjustment of Y-axis Unit
8. Assembly of Parts around the Axis
9. Assembly and Adjustment of X-axis Unit
10. Final Assembly of Body Frame
11. Attachment of Cover Bottom
12. Attachment of Inner Cover
13. Attachment of Timing Belt
14. Attachment of Laser Power Supply
15. Attachment of Accessories
16. Attachment of Cover Front
17. Wiring of DC Line
18. Attachment of Outside Cover
19. Wiring of AC Line
20. Attachment of Working Bed
21. Adjustment of Axis Limit
22. Attachment of Mirror Lens Mount
23. Attachment of Top Cover
24. Attachment of Laser Tube
25. Optical axis adjustment (Laser tube)
26. The #1 reflection mirror optical axis adjustment
27. The #2 and #3 reflection mirror optical axis adjustment
28. Cover attachment
29. Installation of software
30. How to use software
31. Height adjustment, How to use
32. How to make an SVG file
33. Option : Water cooling kit assembly
34. Option :Laser pointer kit attachment
35. Maintenance
36. FAQ

Smart Laser CO2 Manual

Attachment of Laser Power Supply

Attachment of Laser Power Supply

Parts list

Parts	Detail	Qty
Laser power supply	40W	1
M5×6 truss	stainless steel	3

Use the two aluminum frame to attach the laser power supply.

Match the holes of laser power to the aluminum frame assembled in “Assembly of Body Frame (bottom part)“, adjust the position of 170mm aluminum frame and fix in place.

Fix laser power supply with M5×6 truss.