SmartDIYs Creator Manual
The display area of the canvas area can be manipulated with the
pan tool or the
zoom tool. You can also control using the following operation method.
Clicking an object selects the object and displays the controller. You can control the object by operating the controller by mouse drag etc. You can also perform these operations from the Properties palette.
You can move the object to any position by dragging the controller. You can also move it with the arrow keys on your keyboard.
When dragging, you can fix the direction of movement by pressing the
You can drag the grips at the corners of the controller to any size. When dragging, hold down the
Shift key to switch the aspect ratio fixed.
When the mouse cursor approaches the grip of the controller, the cursor icon becomes a mark of the rotation control. You can rotate it to any angle by dragging in this state.
When dragging, press the
Shift key to rotate 45 degrees.
With the object selected, you can copy to the paste buffer by clicking the copy icon. In this state, you can replicate objects by clicking the paste icon. At this time, the laser parameters linked to the object are shared with the copy source object.
With an object selected, you can delete it by clicking the trash can icon.
Right-click with the object selected to display the menu. You can perform any alignment operation from the "Arrange" item in this menu.
Align to selected object
It is effective when multiple objects are selected. Aligned in the rectangular range of multiple selected objects. If you select multiple objects and "right alignment", they will be aligned with the right edge of the rightmost object.
Align to canvas
Right-click with the object selected to display the menu. You can do any reverse operation from the "Transform" item of this menu.
Right-click with the object selected to display the menu. You can move the selected object to the back by clicking "Move to Back" in this menu.