Working Bench for FABOOL Laser DS Manual
| No. | Parts Name | Notes | Pictures | Qty |
| 400 | Aluminum Frame 20×40 1363mm |  |
2 | |
| 401 | Aluminum Frame 20×40 1323mm |  |
4 | |
| 402 | Aluminum Frame 20×40 1013mm |  |
6 | |
| 403 | Aluminum Frame 20×40 430mm |  |
4 | |
| 404 | Aluminum Frame 20×40 350mm |  |
2 | |
| 405 | Right-Angle Bracket |  |
40 | |
| 406 | M5Post-in Nut |  |
100 | |
| 407 | M5x8Hex Socket Head Cap Screw |  |
80 | |
| 409 | M5x8Low Head Screw |  |
6 | |
| 410 | M5x16Low Head Screw | *Use in the installation of ventilating fan |  |
16 |
| 411 | Table Bottom Plate | *Use in the installation of ventilating fan |  |
1 |
| 59 | Joint BKTs | *Enclosed in the box with the main unit |  |
2 |
Picture ( from above )
Picture ( from the right )
Picture ( scale‐up on the red-marked area )
Referring to the picture, attach [402]1013mm Aluminum Frame 20*40mm on the ditch on the outer side of [403]450mm Aluminum Frame 20*40mm.
Referring to the picture, attach [400]1363mm Aluminum Frame 20*40mm on the ditch on the bottom side, and [402]1013mm Aluminum Frame 20*40mm on the ditch on the upper side.
Referring to the picture, attach [402]1013mm Aluminum Frame 20*40mm on the ditch on the bottom side, and [400]1363mm Aluminum Frame 20*40mm on the ditch on the upper side.
Fix the 4 red-marked areas on the picture with [406]M5 Post-in Nut and [409]M5x8 Low Head Screw.
※Don’t use the red-circled hole.
How to place the laser unit on the frame
Firstly, place the unit on top of the frame like the photo. And find the red circled part with M5x8 Low Head Screw.
Place the M5 Post-in Nut as shown in the photo.
After that, detach the M5x8 Low Head Screw on the unit and place the Joint BKT as it is shown in the photo.
